Loading report..

Highlight Samples

Regex mode off

    Rename Samples

    Click here for bulk input.

    Paste two columns of a tab-delimited table here (eg. from Excel).

    First column should be the old name, second column the new name.

    Regex mode off

      Show / Hide Samples

      Regex mode off

        Export Plots

        px
        px
        X

        Download the raw data used to create the plots in this report below:

        Note that additional data was saved in multiqc_hg38_data when this report was generated.

        Choose Plots

        If you use plots from MultiQC in a publication or presentation, please cite:

        MultiQC: Summarize analysis results for multiple tools and samples in a single report
        Philip Ewels, Måns Magnusson, Sverker Lundin and Max Käller
        Bioinformatics (2016)
        doi: 10.1093/bioinformatics/btw354
        PMID: 27312411

        Save Settings

        You can save the toolbox settings for this report to the browser.

        Load Settings

        Choose a saved report profile from the dropdown box below:

        About MultiQC

        This report was generated using MultiQC, version 1.9 (e0ac5b2)

        You can see a YouTube video describing how to use MultiQC reports here: https://youtu.be/qPbIlO_KWN0

        For more information about MultiQC, including other videos and extensive documentation, please visit http://multiqc.info

        You can report bugs, suggest improvements and find the source code for MultiQC on GitHub: https://github.com/ewels/MultiQC

        MultiQC is published in Bioinformatics:

        MultiQC: Summarize analysis results for multiple tools and samples in a single report
        Philip Ewels, Måns Magnusson, Sverker Lundin and Max Käller
        Bioinformatics (2016)
        doi: 10.1093/bioinformatics/btw354
        PMID: 27312411

        These samples were run by seq2science v0.3.0, a tool for easy preprocessing of NGS data.

        Take a look at our docs for info about how to use this report to the fullest.

        Contact E-mail
        yourmail@here.com
        Workflow
        hendrik
        Date
        November 03, 2020

        Report generated on 2020-11-04, 11:35 based on data in:

        Change sample names:

        General Statistics

        Showing 8/8 rows and 13/28 columns.
        Sample Name% DuplicationGC content% PF% AdapterInsert Size% Dups% MappedM Total seqs% Proper PairsM Total seqsGenome coverageM Genome readsM MT genome reads
        White-Bloodcells-Morsche-MDL1-C-nonstimulated-0-16238
        11.2%
        51.7%
        98.2%
        0.1%
        203 bp
        17.0%
        100.0%
        39.3
        100.0%
        28.2
        0.8 X
        58.4
        0.5
        White-Bloodcells-Morsche-MDL2-C-nonstimulated-1-16239
        7.9%
        52.5%
        98.0%
        0.1%
        189 bp
        14.1%
        100.0%
        39.8
        100.0%
        29.1
        0.8 X
        60.7
        0.6
        White-Bloodcells-Morsche-MDL3-C-stimulated-0-16240
        17.3%
        52.4%
        97.8%
        0.1%
        190 bp
        23.3%
        100.0%
        43.0
        100.0%
        28.0
        0.9 X
        67.2
        0.4
        White-Bloodcells-Morsche-MDL4-C-stimulated-1-16241
        14.8%
        52.0%
        98.1%
        0.1%
        184 bp
        21.5%
        100.0%
        41.4
        100.0%
        27.8
        0.9 X
        62.5
        0.5
        White-Bloodcells-Morsche-MDL5-L-nonstimulated-0-16242
        22.2%
        51.0%
        98.0%
        0.1%
        190 bp
        27.1%
        100.0%
        45.3
        100.0%
        29.0
        0.9 X
        65.6
        0.4
        White-Bloodcells-Morsche-MDL6-L-nonstimulated-1-16243
        16.9%
        50.5%
        98.1%
        0.1%
        191 bp
        21.1%
        100.0%
        36.5
        100.0%
        25.5
        0.7 X
        51.7
        0.3
        White-Bloodcells-Morsche-MDL7-L-stimulated-0-16244
        6.0%
        50.4%
        97.6%
        0.1%
        194 bp
        10.9%
        100.0%
        32.1
        100.0%
        25.1
        0.6 X
        45.8
        0.4
        White-Bloodcells-Morsche-MDL8-L-stimulated-1-16245
        5.5%
        52.5%
        98.0%
        0.1%
        191 bp
        9.8%
        100.0%
        38.4
        100.0%
        23.7
        1.5 X
        105.6
        0.4

        Sample clustering

        fastp

        fastp An ultra-fast all-in-one FASTQ preprocessor (QC, adapters, trimming, filtering, splitting...)

        Filtered Reads

        Filtering statistics of sampled reads.

        loading..

        Duplication Rates

        Duplication rates of sampled reads.

        loading..

        Insert Sizes

        Insert size estimation of sampled reads.

        loading..

        Sequence Quality

        Average sequencing quality over each base of all reads.

        loading..

        GC Content

        Average GC content over each base of all reads.

        loading..

        N content

        Average N content over each base of all reads.

        loading..

        Picard

        Picard is a set of Java command line tools for manipulating high-throughput sequencing data.

        Insert Size

        Plot shows the number of reads at a given insert size. Reads with different orientations are summed.

        loading..

        Mark Duplicates

        Number of reads, categorised by duplication state. Pair counts are doubled - see help text for details.

        The table in the Picard metrics file contains some columns referring read pairs and some referring to single reads.

        To make the numbers in this plot sum correctly, values referring to pairs are doubled according to the scheme below:

        • READS_IN_DUPLICATE_PAIRS = 2 * READ_PAIR_DUPLICATES
        • READS_IN_UNIQUE_PAIRS = 2 * (READ_PAIRS_EXAMINED - READ_PAIR_DUPLICATES)
        • READS_IN_UNIQUE_UNPAIRED = UNPAIRED_READS_EXAMINED - UNPAIRED_READ_DUPLICATES
        • READS_IN_DUPLICATE_PAIRS_OPTICAL = 2 * READ_PAIR_OPTICAL_DUPLICATES
        • READS_IN_DUPLICATE_PAIRS_NONOPTICAL = READS_IN_DUPLICATE_PAIRS - READS_IN_DUPLICATE_PAIRS_OPTICAL
        • READS_IN_DUPLICATE_UNPAIRED = UNPAIRED_READ_DUPLICATES
        • READS_UNMAPPED = UNMAPPED_READS
        loading..

        SamTools pre-sieve

        Samtools is a suite of programs for interacting with high-throughput sequencing data.

        The pre-sieve statistics are quality metrics measured before applying (optional) minimum mapping quality, blacklist removal, mitochondrial read removal, and tn5 shift.

        Percent Mapped

        Alignment metrics from samtools stats; mapped vs. unmapped reads.

        For a set of samples that have come from the same multiplexed library, similar numbers of reads for each sample are expected. Large differences in numbers might indicate issues during the library preparation process. Whilst large differences in read numbers may be controlled for in downstream processings (e.g. read count normalisation), you may wish to consider whether the read depths achieved have fallen below recommended levels depending on the applications.

        Low alignment rates could indicate contamination of samples (e.g. adapter sequences), low sequencing quality or other artefacts. These can be further investigated in the sequence level QC (e.g. from FastQC).

        loading..

        Alignment metrics

        This module parses the output from samtools stats. All numbers in millions.

        loading..

        SamTools post-sieve

        Samtools is a suite of programs for interacting with high-throughput sequencing data.

        The post-sieve statistics are quality metrics measured after applying (optional) minimum mapping quality, blacklist removal, mitochondrial read removal, and tn5 shift.

        Percent Mapped

        Alignment metrics from samtools stats; mapped vs. unmapped reads.

        For a set of samples that have come from the same multiplexed library, similar numbers of reads for each sample are expected. Large differences in numbers might indicate issues during the library preparation process. Whilst large differences in read numbers may be controlled for in downstream processings (e.g. read count normalisation), you may wish to consider whether the read depths achieved have fallen below recommended levels depending on the applications.

        Low alignment rates could indicate contamination of samples (e.g. adapter sequences), low sequencing quality or other artefacts. These can be further investigated in the sequence level QC (e.g. from FastQC).

        loading..

        Alignment metrics

        This module parses the output from samtools stats. All numbers in millions.

        loading..

        deepTools

        deepTools is a suite of tools to process and analyze deep sequencing data.

        Correlation heatmap

        Pairwise correlations of samples based on distribution of sequence reads

        loading..

        PCA plot

        PCA plot with the top two principal components calculated based on genome-wide distribution of sequence reads

        loading..

        Strandedness

        Strandedness package provides a number of useful modules that can comprehensively evaluate high throughput RNA-seq data.

        Sequencing strandedness was inferred for the following samples, and was called if 60% of the sampled reads were explained by either sense (forward) or antisense (reverse).

        Infer experiment

        Infer experiment counts the percentage of reads and read pairs that match the strandedness of overlapping transcripts. It can be used to infer whether RNA-seq library preps are stranded (sense or antisense).

        loading..

        Samples & Config

        The samples file used for this run:

        sample assembly descriptive_name letter stimulation number
        White-Bloodcells-Morsche-MDL1-C-nonstimulated-0-16238 hg38 MDL1-CU0 C no zero
        White-Bloodcells-Morsche-MDL2-C-nonstimulated-1-16239 hg38 MDL2-CU1 C no one
        White-Bloodcells-Morsche-MDL3-C-stimulated-0-16240 hg38 MDL3-CS0 C yes zero
        White-Bloodcells-Morsche-MDL4-C-stimulated-1-16241 hg38 MDL4-CS1 C yes one
        White-Bloodcells-Morsche-MDL5-L-nonstimulated-0-16242 hg38 MDL5-LU0 L no zero
        White-Bloodcells-Morsche-MDL6-L-nonstimulated-1-16243 hg38 MDL6-LU1 L no one
        White-Bloodcells-Morsche-MDL7-L-stimulated-0-16244 hg38 MDL7-LS0 L yes zero
        White-Bloodcells-Morsche-MDL8-L-stimulated-1-16245 hg38 MDL8-LS1 L yes one

        The config file used for this run: 
        # tab-separated file of the samples
samples: samples.tsv

# pipeline file locations
result_dir: /scratch/siebrenf/hendrik/results2  # where to store results
genome_dir: /scratch/siebrenf/genomes          # where to look for or download the genomes
fastq_dir:  /scratch/siebrenf/hendrik/fastq    # where to look for or download the fastqs


# contact info for multiqc report and trackhub
email: yourmail@here.com

# produce a UCSC trackhub?
create_trackhub: True

# how to handle replicates
technical_replicates: merge    # change to "keep" to not combine them

# which trimmer to use
trimmer: fastp

# which quantifier to use
quantifier: htseq  # or salmon or featurecounts

##### aligner and filter options are not used for the gene counts matrix if the quantifier is Salmon

# which aligner to use
aligner: star

# filtering after alignment
remove_blacklist: True
min_mapping_quality: 255  # (only keep uniquely mapped reads from STAR alignments)
only_primary_align: True

##### differential gene expression analysis (optional) #####

#deseq2:
#  multiple_testing_procedure: BH
#  alpha_value: 0.1
#  shrinkage_estimator: apeglm

#contrasts:
#  - 'stage_2_1'
#  - 'stage_all_1'

        MultiQC v1.9 (e0ac5b2) - Written by Phil Ewels, available on GitHub.

        This report uses HighCharts, jQuery, jQuery UI, Bootstrap, FileSaver.js and clipboard.js.